ClairDerm 2 Microdermabrasion Machine Features:

Power:

Two vacuum pumps provide a wide range of power from very light for sensitive skin to very strong to meet the requirements of a medical practice. The power setting is controlled by the knob on the front of the unit and indicated by the digital gauge located just above the knob.

Digital Gauge:

In a medical practice it is important to thoroughly and accurately chart the progress of you patients. The ClairDerm2's digital gauge provides you with the means to precisely chart the power settings used to provide the best results for your client.

Marketing Materials:

Client brochures are included with the purchase of your ClairDerm system so you can effectively promote your new treatments to your clients and make the most of your new investment.

Noise:

The ClairDerm machines utilize internal sound dampening to keep operating noise to a minimum. And while the units run most efficiently with both vacuum pumps engaged, they include a switch located at the rear of the machine that allows for single pump operation that silences the machine further.

Size:

ClairDerm's compact design utilizes a small footprint of 20 inches by 20 inches with a height of 7.5 inches. The units weight under 20lbs and are portable enough to be used by technicians operating out of multiple offices.

Dehumidification:

External moisture can be pulled into a microdermabrasion machine making crystals stick together and thus causing the machine to clog. ClairDerm units are fitted with a special dehumidification canister that captures moisture out of the incoming air to prevent these types of problems. The canister contains silica beads that change color from blue to pink when saturated and can be dried out to restore their moisture holding ability.

Anti-Clog:

The ClairDerm units include an anti-clog device that back flushes the lines and filter with air to keep them clean and free of build up. This operation takes only a few seconds and is run at the conclusion of each treatment by first turning the vacuum pressure up to full and closing the crystals flow off at the toggle switch. With the vacuum pressure running high and the crystals flow off the technician simply covers the end of the handpiece and holds the anti-clog button down for one second to clean out the lines and filter of any standing crystals.

Handpiece:

The handpiece is a lightweight plastic that utilizes disposable tips to keep the treatment sanitary. These economical handpieces are quite durable and generally only need replacement every 9 months.

Crystal Containers:

Fresh crystals are poured into the top of the new crystals canister making for easy and cost effective replacement. Refuse crystals are disposed of by screwing the top off of the used crystals container and dumping them out into gray or red bag waste containers.

Filters:

The ClairDerm utilizes a hard Teflon filter that only requires replacement every 9-12 months. A secondary filter is located inside the machine (keeping crystals from entering the vacuum pumps) that should never need replacing.

Starter Kit:

Starter kit for the ClairDerm 2 includes 6 bottles of crystals and 50 disposable tips.

Warranty:

The ClairDerm is backed by a Lifetime Warranty provided by the manufacturer.